A Colorful Gateway to 3D Printing — Fast, Plug-and-Play, and Fully Automated
The A1 probes the bed with the nozzle to automatically measure the absolute Z-offset before every job without human intervention.
Equipped with specialized sensors in both the toolhead and heatbed to balance X and Y axes resonance frequencies automatically.
Runs a cutting-edge nozzle pressure-based flow algorithm to configure Pressure Advance values dynamically.
The Bambu Lab A1 brings high-velocity performance safely down to bedslinger architectures. Utilizing low-drag all-metal linear rails, robust accelerometers, and an advanced processing core, it coordinates extrusion paths to maintain pristine finish quality at top speeds.
An array of targeted tracking elements check layout parameters constantly, actively managing filament runouts, tangled spools, and tracking odometer usage across complex multi-color pathways.
Built upon a rigid reinforced steel and extruded aluminum architecture. Features an all-metal hotend coupled with hardened steel extruder gear sets supporting operating environments up to 300 °C.
Integrates localized LAN-mode or encrypted cloud network interfaces. Fully embedded with automated power loss recovery, filament tangle detection arrays, and real-time low frame rate monitoring modules.
| Item รายการ | Specification ข้อมูลจำเพาะ | |
|---|---|---|
| Printing Technology เทคโนโลยีการพิมพ์ | [Insert Data] | |
| Body โครงสร้าง | Build Volume (W × D × H) | [Insert Data] |
| Chassis | [Insert Data] | |
| Toolhead หัวฉีด | Hot End | [Insert Data] |
| Nozzle | [Insert Data] | |
| Max Hot End Temperature | [Insert Data] | |
| Nozzle Diameter | [Insert Data] | |
| Speed ความเร็ว | Max Speed of Toolhead | [Insert Data] |
| Max Acceleration | [Insert Data] | |
| Item รายการ | Specification ข้อมูลจำเพาะ | |
|---|---|---|
| Printing Technology เทคโนโลยีการพิมพ์ | [Insert Data] | |
| Body โครงสร้าง | Build Volume (W × D × H) | [Insert Data] |
| Chassis | [Insert Data] | |
| Toolhead หัวฉีด | Nozzle | [Insert Data] |
| Max Hot End Temperature | [Insert Data] | |
| Nozzle Diameter | [Insert Data] | |
| Item รายการ | Specification ข้อมูลจำเพาะ | |
|---|---|---|
| Printing Technology เทคโนโลยีการพิมพ์ | [Insert Data] | |
| Body โครงสร้าง | Build Volume (W × D × H) | [Insert Data] |
| Chassis | [Insert Data] | |
| Toolhead หัวฉีด | Nozzle | [Insert Data] |
| Max Hot End Temperature | [Insert Data] | |
| Nozzle Diameter | [Insert Data] | |
| Item รายการ | Specification ข้อมูลจำเพาะ | |
|---|---|---|
| Printing Technology เทคโนโลยีการพิมพ์ | [Insert Data] | |
| Body โครงสร้าง | Build Volume (W × D × H) | [Insert Data] |
| Chassis | [Insert Data] | |
| Toolhead หัวฉีด | Nozzle | [Insert Data] |
| Max Hot End Temperature | [Insert Data] | |
| Nozzle Diameter | [Insert Data] | |
| Item รายการ | Specification ข้อมูลจำเพาะ | |
|---|---|---|
| Printing Technology เทคโนโลยีการพิมพ์ | Fused Deposition Modeling | |
| Body โครงสร้าง | Build Volume (W × D × H) | 256 × 256 × 256 mm³ |
| Chassis | Steel + Extruded Aluminum | |
| Toolhead หัวฉีด | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included), 0.2/0.6/0.8 mm (Optional) | |
| Heatbed ฐานพิมพ์ | Build Plate | Bambu Textured PEI Plate |
| Max Build Plate Temperature | 100 °C | |
| Speed ความเร็ว | Max Speed of Toolhead | 500 mm/s |
| Max Acceleration of Toolhead | 10,000 mm/s² | |
| Dimensions ขนาดและน้ำหนัก | Physical Dimensions (W×D×H) | 385 × 410 × 430 mm |
| Net Weight | 8.3 kg | |
| Item รายการ | Specification ข้อมูลจำเพาะ | |
|---|---|---|
| Printing Technology เทคโนโลยีการพิมพ์ | Fused Deposition Modeling | |
| Body โครงสร้าง | Build Volume (W × D × H) | 180 × 180 × 180 mm³ |
| Chassis | Steel + Extruded Aluminum | |
| Toolhead หัวฉีด | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included), 0.2/0.6/0.8 mm (Optional) | |
| Heatbed ฐานพิมพ์ | Build Plate | Bambu Textured PEI Plate |
| Max Build Plate Temperature | 80 °C | |
| Speed ความเร็ว | Max Speed of Toolhead | 500 mm/s |
| Max Acceleration of Toolhead | 10,000 mm/s² | |
| Dimensions ขนาดและน้ำหนัก | Physical Dimensions (W×D×H) | 347 × 315 × 365 mm |
| Net Weight | 5.5 kg | |